 |
Strap clips and magnetic
badge holders provide an economical and
convenient method of wearing your badge
prominently. |
| |
| Strap Clips |
|
| |
 |
| |
| 2-Hole Strap Clip |
| |
| . |
Nickel-plated steel with 2
3/4"
(70mm) clear vinyl
strap | | |
| |
 |
| |
| 2-Hole Strap Clip |
| |
| . |
Stainless
steel with 3 1/2"
(89mm) clear vinyl
strap | | |
| |
 |
| |
| 2-Hole Strap Clip |
| |
| . |
Nickel-plated steel with 2
3/4"
(70mm) opaque
white,
filament-reinforced vinyl
strap | | |
| |
 |
| |
| 2-Hole Strap Clip |
| |
| . |
Nickel-plated steel with 2
3/4"
(70mm) clear vinyl
strap | | |
| |
| |
|
| Magnetic Card
Holders |
| |
| |
MagnaBadge Magnetic
Badge
Attachment |
| |
| . |
One steel
plate with 2 round "rare-earth" magnets and one
zinc-plated steel plate with pressure-sensitive
foam tape Mounting Plate. |
| . |
Dimensions: 1 3/4 x
1/2" (44.5 x
12.5mm) |
| |
 |
 |
| |
| |
MagnaMini Magnetic
Badge
Attachment |
| |
| . |
One ABS
encased plate with 2 round "rare-earth" magnets
and one zinc-plated steel plate with
pressure-sensitive foam tape Mounting
Plate. |
| . |
Dimensions: 1 1/4 x
3/8" (32 x
9.5mm) | | |
 |
 |
|
| Grip and Clamp
Attachments |
| |
|
 |
| |
The Gripper - No Need
for Slot
Punching! |
| |
| . |
The
Gripper can be added to existing attachments
such as badge reels, lanyards and strap clips.
It holds 30mil standard, smart chip or proximity
cards without the need to slot punch the card.
Plastic outer piece with silicone inner core. It
holds cards with up to 5 lbs of vertical force
and greater than 5 lbs of horizontal
force. |
| . |
Dimensions: 11/16"
(17mm) wide x 1" (25mm)
high. | |
 | |
 |
| |
| The Card Clamp - Great for Today's
high Tech Cards |
| |
| . |
Replaces
standard strap end fittings. No need to slot
punch, which can ruin embedded electronics in
proximity, smart cards and other high technology
cards. Grips to a pull strength of 10 lbs. For
0.30" thick ID cards, as well as thinner cards
too! | | |
|
| 3-in-One Slot
Punch |
| |
|
 |
| |
| . |
This
3-in-1 punch switches from slot punch (9/16 x
1/8") to one-hole punch (1/4" round) to round
corner punch. The centre guide adjusts for
accurate hole centering. |
| . |
Punch your plastic or
laminated ID cards, or up to 18 sheets of 20 lb.
bond paper. Plus the handle locks down for easy
storage. | | |
